| Customization: | Available |
|---|---|
| Type: | Plunger Pump |
| Material: | Iron |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Rexroth piston pump
Plunger pump is an important device in hydraulic system. It relies on the reciprocating movement of the plunger in the cylinder block to change the volume of the sealing working cavity to achieve oil suction and pressure. The piston pump has the advantages of high rated pressure, compact structure, high efficiency and convenient flow adjustment.
Working principle of piston pump
The piston pump is divided into two representative structural forms: axial piston pump and radial piston pump; Because radial piston pump is a new type of high-efficiency pump with high technology content, radial piston pump will become an important part of the application field of piston pump; Radial piston pump is a kind of piston pump whose reciprocating motion direction is perpendicular to the driving shaft.The oil flow in and out of the pump body and the flow passage on the valve shaft are controlled by the oil suction port on the valve shaft. The liquid pressure generated in the pump body is absorbed by the surface of static pressure balance.
Product picture Product picture Product picture
|
Pressure at working port B
|
Definition
|
|
|
Nominal pressure pnom
|
280 bar
|
The nominal pressure corresponds to the maximum design pressure.
|
|
Maximum pressure pmax
|
350 bar
|
The maximum pressure corresponds to the maximum working pressure within
a single operating period. The sum of single operating periods must not exceed
the total operating period.
|
|
Single operating period
|
2 ms
|
|
|
Total operating period
|
300 h
|
|
|
Minimum pressure pB absolute
(high-pressure side)
|
10 bar
|
Minimum pressure on the high-pressure side (B) which is required in order
to prevent damage to the axial piston unit.
|
|
Rate of pressure change RA max
|
16000 bar/s
|
Maximum permissible pressure build-up and reduction speed during a pressure
change across the entire pressure range.
|
|
Pressure at suction port S (inlet)
|
||
|
Minimum pressure pS min Standard
|
0.8 bar absolute
|
Minimum pressure at suction port S (inlet) which is required to prevent damage
to the axial piston unit. The minimum pressure depends on the rotational speed
and displacement of the axial piston unit.
|
|
Maximum pressure pS max
|
10 bar
|
|
|
Case pressure at port L, L1
|
||
|
Maximum pressure pL max
|
2 bar absolute
|
Maximum 0.5 bar higher than inlet pressure at port S, but not higher than pL max.
A drain line to the reservoir is required.
|
|
Pilot pressure port X with external high pressure
|
||
|
Maximum pressure pmax
|
350 bar
|
When designing all control lines with external high pressure, the values for the
rate of pressure change, maximum single operating period and total operating
period applicable to port B must not be exceeded.
|
Valve Pump Cylinder
Q: Are you a manufacturer?
A: Yes, we have our own factory, we can provide excellent goods at competitive price.
Q: What is the payment terms?
A: Full order: 30% in advance, the balance payment before shipment;
Small /Sample order: full payment in advance.
Q: How long is guarantee?
A: For one year,we will provide a new one if any quality issue.
){kind=link}